[esa-t474] RE: Things to do before running

Mark Slater slater at hep.phy.cam.ac.uk
Fri Mar 28 19:36:54 GMT 2008


Thanks a lot for that Steve! The less we need to do on the shifts the 
better :) As for definite attendees, that would be myself and Nigel. Luis 
is a possible, but that's about it! As I say, could be a little 
short-staffed :)

Thanks,

Mark


On Fri, 28 Mar 2008, Molloy, Stephen Daniel wrote:

> Thanks for this Mark.  I was planning on doing the bunch length measurements, so putting me down as Mr LOLA is fine.  Also, I can be the monkey that finds the collimator edges.
> 
> Has the list of people travelling for T480 been finalised yet?
> 
> Steve
> 
> 
> -----Original Message-----
> From: Mark Slater [mailto:slater at hep.phy.cam.ac.uk]
> Sent: Fri 3/28/2008 07:16
> To: esa-t474 at hep.ucl.ac.uk; Watson, NK (Nigel); Fernandez-Hernando, JL (Juan); Molloy, Stephen Daniel
> Subject: Things to do before running
>  
> Dear All,
> 
> Before Easter, Bino, Nigel and myself had a get-together to discuss  
> the upcoming run. We came up with the following list of things that need 
> to be done beforehand to ensure we have good BPM resolution and also some 
> specific T480/T474 things. Please add/remove as you see fit. Also, we will 
> probably be quite short-staffed for this run and so if anyone wants to 
> volunteer to be in charge of a specific area, do say so. I've 
> 'volunteered' some people already so please confirm if this is OK!
> 
> Thanks,
> 
> Mark
> 
> General BPM Jobs
> ----------------
> 
> Determine channel map (Yury?) 
> Setup scripts for processing, Data quality, Calibration (HH), Cal Tone 
> (Bino very kindly said he will set this up beforehand and I'll make sure 
> it's all working beforehand) 
> Check Cal tone running (Alex?) 
> Tune Cavities (Yury?) 
> Alignement Mover Systems (MikeW?)
> Interferometer (MikeH?)
> 
> 1 Shift to determine:
> 
> 	Frequency Run  (Freqs, decays, t0s, Bandwidth)
> 	Calibration
> 	Resolution/Stability
> 	Optimise Attenuation / Dynamic Range (maybe a bit optimistic)
> 	
> 
> T474
> ----
> 
> Take in situ Magnet Data
> Decide on fields/magnet running
> 
> 
> T480
> ----
> 
> ~2 shifts:
> 	Find edges of collimators
> 	Collimator surveys
> 	Optics (Frank isn't available so any help here would be 
> appreciated!)
> 	LOLA (Steve?)
> 
> 
> 



More information about the esa-t474 mailing list